XY-0068 RFID Fixed Reader
XY-0068 RFID Fixed Reader
  • XY-0068 RFID Fixed Reader
  • XY-0068 RFID Fixed Reader
  • XY-0068 RFID Fixed Reader
  • XY-0068 RFID Fixed Reader

XY-0068 RFID Fixed Reader


XY-0068 UHF Fixed Reader

Introduction:

XY-0068 is a high performance 4-channel reader which can be well adapted to the installation requirements for indoor or outdoor environments.XY-0068 reader is developed based on M-2800 UHF RFID reader module, its core chip uses Impinj's INDY R2000. It is a Reader easy to install and use with high Performance.

This Reader usually use in Logistics & Supply Chain Visibility, Item level inventory tracking, Race timing,Attendee Tracking, Materials management, Access Control,IT Asset Tracking,Tool Tracking, Kiosks, Library Systems,Laundry Mana,gement,Interactive Marketing,RTLS (Real Time Location System)and so on.



Product Details

XY-0068 RFID Fixed Reader Specification

Parameters:

Dimension: 230mm(L) x 160mm(W) x 28mm(H)

Weight: 1.8 Kg

Body Material: Die-cast aluminum

Input Voltage: DC 12V – 18V

Standby Mode Current: <30mA

Sleep Mode Current: <100uA

Max Operating Current: 600mA  +/-5% @ DC 12V Input

Operating Temperature: - 20 °C  -  + 55  °C

Storage Temperature: - 20 °C  -  + 85  °C

Humidity: < 95% ( + 25 °C)

Air Interface Protocol: EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C ISO 18000-6B

Spectrum Range: 860Mhz – 960Mhz

Supported Regions: US, Canada and other regions following U.S. FCC, Europe and other regions following ETSI EN 302 208 with & without LBT regulations, Mainland China, Japan, Korea, Malaysia, Taiwan

Output Power: 0 – 33dBm

Output Power Precision: +/- 1dB

Output Power Flatness: +/- 0.2dB

Receive Sensitivity: < -85 dBm

Peak Inventory Speed: > 700 tags/sec

Tag Buffer Size: 1000 tags @ 96 bitEPC

Tag RSSI: Supported

Antenna Detector: Supported

Ambient Temp Monitor: Supported

Working Mode: Single/DRM

Host Communication: RS-232 or TCP/IP

GPIO: 2 inputs optical coupling  2 outputs optical coupling

Max Baud Rate: 115200 bps

Heat Dissipation: Air cooling

 

 

Features:

1. Based on Indy R2000 chip:

RF transceiver uses Impinj Indy R2000.

 

2. Optimized algorithm for a little of tags:

Better tag response time.

Optimized for small tag quantity applications.

 

3. Dual CPU architecture:

Main CPU is responsible for tag inventory, assistant CPU is responsible for data management.

Inventory and data transfer are parallel and simultaneous. This feature improves the total performance significantly.

Assistant CPU is responsible for generating real random number.

Assistant CPU is responsible for system operating surveillance.

 

4. Fast 4 antenna switch inventory:

High speed inventory therefore antennas could beswitched rapidly. The minimum inventory duration for an antenna is 25ms.

Every antenna’s inventory duration is configurable.

 

5. Two inventory modes:

Buffer mode and real time mode.

In buffer mode, inventoried tag will be stored in buffer. This mode improves the efficiency of multi tag inventory.

In real time mode, inventoried tag will send the data in real time. This mode allows user to get tag’s data instantly.

 

6. Hardware system halt detection:

Hardware CPU status surveillance.

Run for 24 hours X 365 days without system halt.

 

7.Low operation voltage:

Input voltage DC 12-18V.                                                                                                          

 

8. Low power consumption:

Maximum out power only needs 1.3A +/-10% (12V DC Input).

Low-power Mode, single tag only 300mA +/-10% (12V DCInput).

 

9. PA health surveillance:

PA status surveillance.

Make sure PA never works under saturated state.Protected it for long term operation.

 

10. 18000-6B/C full compatible:

100% 18000-6B/C compatible.

Can be switched rapidly between protocols.

 

11. 18000-6B large data read/write:

Read 216 bytes in one time takes less than 500ms.

Write 216 bytes in one time takes less than 3.5s.

Can also read/write data with various lengths.

Extremely stable (approximate 100% success rate).

 

12. Antenna connection detection:

Detect antenna connection.

Protecting RF receiver.

Can be cancelled by command.

 

13.Excellent industrial design:

Disposable cast aluminum body which is a classic model in the industry.

 

14.High quality connector system:

All the connector be used are famous brand products with bestquality. Ensure a reliable connection.

 

15.Excellent onboard power system:

8 independent power supplies on board. Every unit issupplied independently.

All of the power supply has soft start function. Improvesthe stability of the power supply system.

 

16.Multi-board temperature sensor:

Multi point surveillance, Accurate monitoring systemoperating temperature.

 

17.Dual backup power output correction:

Make sure output power can be fine adjusted.

Two mutually backup power parity modules. Unless alsodamaged, the system can operate normally.

 

18.Concise and effective command system:

Serial communication interface.

Simple, convenient and effective for easy integration.

 

19.Excellent thermal design:

All heating devices have thermal structure.

A large area of heat sink contact surface.

Thermal coupling interface using high thermalconductivity solid materials which are non-volatile under high temperature.

Disposable cast aluminum body, long-term continuousoperation without heat.